The variable-output M720V RAID WeaponLight produces brilliant 150-lumen white light or 240 milliwatts of infrared output for use with night vision devices.
Output -- White Light
High: 150.0 lumens
Medium: 75.0 lumens
Low: 15.0 lumens
Output -- Infrared
High: 240.0 mW
Medium: 100.0 mW
Low: 6.0 mW
Tactical Runtime* (White): 1.8 hours
Infrared Runtime (High): 8.0 hours
Length: 3.8 inches
Bezel Diameter: 1.37 inches
Weight w/ Batteries: 9.6 ounces
Batteries: 2 x 123A
*Runtime (on highest output for variable-output lights) until output drops below 50 lumens
The variable-output M720V RAID WeaponLight produces brilliant 150-lumen white light or 240 milliwatts of infrared output for use with night vision devices—with no need for IR filters or spare lamps. Simply push and twist the self-locking selector ring on the dual-spectrum V-series head to switch between white light or IR illumination—or select the "disable" setting to prevent accidental discharges. In either spectrum mode, the M720V's TIR lens produces a tight beam suited for close- to medium-range applications with sufficient peripheral illumination for situational awareness.
The highly efficient LEDs are virtually immune to failure since there's no filament to burn out or break. It comes with a pressure-activated SR07-M720V tape switch (with a 7" cable) that can be positioned where you choose. If your remote switch becomes damaged or disconnected, rotate your RAID WeaponLight's white-light selector switch to ";flashlight" mode and activate it directly via its integral pushbutton dome switch. (This same pushbutton switch provides low navigational white light when "flashlight" mode is not selected.) This selector switch also lets you choose three different white-light output settings: high, medium, or strobe. The IR selector switch, located on opposite side, offers high-, medium-, and low-output settings when IR mode is selected on head.
The M720V attaches solidly to your Picatinny rail via our Swing-Lever™ clamp, which self-adjusts to out-of-spec rails and features a lever lock to prevent loosening from recoil or impact. Built to withstand the rigors of combat, the M720V is constructed of high-strength aerospace aluminum with Mil-Spec hard anodizing for superior toughness and corrosion resistance and optically coated tempered glass for durability and maximum light transmission. It's also O-ring and gasket sealed to keep out dust, dirt, and moisture. Available in black or desert sand.
Fits: Rifles, carbines, or submachine guns with a Picatinny rail on the forend.