||Out of stock
The Pusher Back Panel Kit was made to augment the Pusher Chest Rig. The design provides flexibility; it can be worn with a front plate, back panel with back plate, chest rig and back panel or just the pusher chest rig. The features and accessories include a plate pocket, 2-liter water bladder pouch, small molle panel for tools or pouches, medical pouch, envelope for a breacher tool, an extendable breacher bag, front plate sleeve, helmet carrier, horizontal rear magazine pouch and a jacket stash pocket. The Pusher Back Panel can hold up to a large plate. All materials and workmanship are 100% made in the USA. System comes in MultiCam and Coyote Brown. All materials and workmanship are 100% made in the USA.
Features & Accessories
2-Liter Water Bladder Pouch: There is an easily accessible pocket at the top of the Pusher Back Panel that holds a 2-liter water bladder. The pocket has a VELCRO® Brand loop to keep the water bladder in place.
Envelope for Breacher Tool: Halligan, sledge hammer, or bolt cutters, the envelop for the breacher tool was designed to handle multiple configurations. The envelope is accompanied by a removable tool strap on the top portion of back panel to secure the tool. There is also a slot at bottom of the Back Panel to allow room for a tool handle.
Breacher Bag: The Breacher bag was designed to house the night vision protective sleeve, general purpose pouch, charges, or other needed supplies. It is made out of a light material that can be easily folded or unfolded depending on the intended use. The bag has a magnet closure and security clip to enclose contents.
Medical Pouch: There are two sets of exterior straps, one holds surgical scissors and the other holds a tourniquet. The interior section of the medical pouch has a sleeve with an elastic strap to hold chest seals or other flat bandages, while leaving room in the pocket for other needed equipment.
Front Plate Sleeve: To increase the modulatory of the system, the front plate sleeve was created to be used in conjunction with all of our chest rigs with the exception of the split front rigs. The sleeve slips over the top of the plate and elastic straps slide under the bottom of the plate. The plate can then be inserted in the pocket of the chest rig and secured with Velcro to hold it in place. The Front Plate Sleeve comes in Small, Medium and Large. Available Colors: Black, Coyote Brown, Desert Digital, MultiCam, Ranger Green & Wolf Grey
Helmet Carrier: The Helmet Carrier was designed to attach a helmet to the back of the pusher back panel when it is not being used. The G Hooks on the top of the helmet carrier connect to the straps of the carrier and the side straps connect to base of back panel. The center of the helmet carrier has a cut out for IFF devices, strobes, V lights or related accessories. The carrier will work with the Pusher Back Panel and the 30L Summit Pack. Available Colors: Black, Coyote Brown, Desert Digital, MultiCam, Ranger Green & Wolf Grey
Horizontal Rear 5.56 Magazine Pouch: The Horizontal Rear 5.56 Magazine Pouch allows you to carry two additional magazines horizontally on the lower back for easy access. VELCRO® brand fasteners is used to attach the pouch to the base of the pack on the bottom of the envelop. The Rear Magazine Pouch can be used in conjunction with the Jacket Stash Pocket or alone. Available Colors: Black, Coyote Brown, Desert Digital, MultiCam, Ranger Green & Wolf Grey
The Jacket Stash Pocket: If your mission requires multiple climates the Jacket Stash Pocket will keep your layering system in an easily accessible location. VELCRO® brand fasteners is used to attach the pocket to the base of the back panel on the bottom of the envelop. The pocket includes drawstring closures and can be accessible from either side. When it is not in use the pocket can be rolled up and secured with a Velcro strap. The Jacket Stash Pocket can be used in conjunction with mag envelop or by itself and will also fit the SCARAB. Available Color: MultiCam LiteLoc
- Designed to augment the Pusher Chest Rig (The Pusher Chest Rig is not included with purchase)
- Can be worn with a front plate, back panel with back plate, chest rig and back panel or just the pusher chest rig
- Can hold up to a large plate
- 100% Made in the USA
- Features & Accessories: 2-Liter Water Bladder Pouch Envelope for Breacher Tool Breacher Bag Medical Pouch Front Plate Sleeve Helmet Carrier Horizontal Rear 5.56 Magazine Pouch The Jacket Stash Pocket